HOME

Locks By Brand>>Arrow>>M Series Knobs

Arrow M Series Knobs

Arrow's offering of knob designs plus every available function make Arrow's grade 2 locksets the most widely specified builders hardware.

ARROW LOCK FUNCTIONS

Lock Chassis- Cold rolled steel with zinc-dichromate finish for corrosion resistance. Latch retractor is precision cast steel. Requires standard 2-1/8" bore through door.

Backset- 2-3/4" backset standard, 3-3/4" and 5" also available.

Door Thickness- 1-3/8" to 1-3/4".

Latch- Brass with 1/2" throw. Latch housing is steel, zinc dichromate finish for corrosion resistance. 7/8" bore on edge of door required. Supplied with sleeve for existing 1" hole.

Latch Front- Brass, bronze or stainless steel

Strike- Brass, bronze, or stainless 4-7/8" X 1-1/4" curved lip or 2-3/4" X 1-1/8" "T" strike standard.

Handing- Non handed.

Mounting- Thru-bolt holes within 2-1/8" cross bore. Contains 2 support plates which secure to face of door as well as accept thru-bolts from inside rose assembly.

Cylinder, standard- Solid brass 6-pin cylinder with Arrow "A" keyway. Can be Masterkeyed, Grand Masterkeyed and Construction masterkeyed.. Conventional cylinders also available in a variety of competitive manufacturers keyways. Supplied with 2 6-pin nickel silver keys.

Cylinder Options- Interchangeable core- lockset prepared for use with 6 or 7 pin interchangeable core. Supplied less core, but packed with 6 or 7 pin tailpieces. Will accept both Best^TM or Falcon^TM type cores. Suffix "IC" to design. High Security for cylinders meeting UL437 for pick and drill resistance.